Step 1: Before we get baking, preheat the oven to 130°C/120°C/Gas Mark 1 and grease and base line an 8” loose bottomed cake tin.
Step 2: Then away we go! Get the butter melting in a small saucepan, as you place the biscuits into a large mixing bowl and crush them up with the end of a rolling pin (or your fingers if you’re feeling strong.) Go on, give them a good bash!
Step 3: Add the Cocoa Powder and melted butter to the crushed biscuits, stir to combine, then transfer to the cake tin your prepared earlier – Blue Peter style! When it’s all in, squish the base down with the back of the spoon so its pressed flat, evenly smooth and compact.
Step 4: Place the chocolate & hazelnut spread into a non-metallic heatproof bowl and then melt in the microwave in 20 second bursts, stirring in between, until melted. Yep, we know, it smells amazing!
Step 5: Next up, place the cream cheese, sugar, Cocoa Powder and Arrowroot together in a large mixing bowl and beat together until smooth. Fold in the cream, then add the eggs one at a time before folding in the melted chocolate & hazelnut too.
Step 6: Now pour the mix into your prepared tin, pop into the oven and bake for 1 hour. When it’s set around the edges, but still has a bit of a wobble in the middle, turn off your oven and allow to cool in the oven for 1 hour. Why? Well, it’ll allow the cheesecake to cool down gently, preventing it from cracking.
Step 7: When the hour’s up – pop it in the fridge overnight to set.
Step 8: To make the ganache, finely chop the chocolate and weigh out the hazelnut spread.
Step 9: Place the cream into a saucepan and heat, when the cream is almost boiling remove from the heat and add both the chocolate & hazelnut spread to the pan. Allow to sit for 1 minute before stirring together to a smooth ganache.
Step 10: Pop 2/3 of the ganache into the fridge to set (we’ll use this to add the piping detail later). Keep the remaining 1/3 at room temperature for the drip.
Step 11: Now, the moment of truth – getting your cheesecake out of the tin smoothly! Stay calm, we’ve got this! First, you’re going to run a knife around the edges of the tin to loosen, before releasing the springform.
Step 12: Next, you’re going to carefully lift the cake off the base, using a palette knife or table knife for leverage if the edges are sticking. Now carefully remove the paper and place onto a serving dish. Phew, you did it!
Step 13: Next up is the drip. Check your room temperature ganache is still free flowing. If it’s set a little – no worries! It can be heated in the microwave for 10 to 20 seconds to loosen. Spoon the ganache over the top of the cake and gently spoon drips down the edge of the cake.
Step 14: Spray a little of the gold shimmer spray into a bowl then dip a fine paintbrush into the liquid. Now, this bit might get a bit messy, so careful what you’re facing! Aiming at the centre of the cheesecake, flick the paintbrush against the index finger of your other hand to create a gold splatter effect. Splatter the top and sides of the cheesecake. And if you do get a bit on your worktop? Don’t worry, it wipes off most surfaces nice and easy.
Step 15: Once your refrigerated ganache has set, transfer to a piping bag fitted with a large French star nozzle (We used a Wilton 6B if you know your nozzles!) Hold the piping bag at a 90 degree angle to the cheesecake, squeeze the bag at around 2cm height from the top of the cake then release to form a peak. Niiiiice! Repeat this technique all the way around the edge of the cheesecake.
Step 16: Oh so nearly done now! Finally, place giant chocolate stars around the edge of the cheesecake in-between your pretty piping blobs, alternating between white and milk chocolate.
Step 17: One final scatter of Glamour and Sparkle Sprinkles and WOW! Your festive wonder is ready to serve. Just pop back in the fridge until the big moment. Psssst, you best tell everyone to go easy on the main course because once dessert comes round, they’ll definitely go hazel-nutty for your sprinkly showstopper!
For the goldest of gold effects, let the shimmer spray sit for 15 minutes after you have sprayed it into the bowl. This will allow some of the alcohol to evaporate and result in a deeper gold.
Don’t have a star shaped nozzle? Well lucky for you, making one out of a piping bag is easy-peasy-ganache-squeezy. Simply lay your piping bag out flat, then cut 2 small triangles from the end, to create a little zig zag across the tip. Pipe through, and you should end up with a spot-on star.
|Per Serving||Per 100 g / ml|
|Fat||35.22 g||25.34 g|
|Carbohydrate||40.70 g||29.28 g|
|Protein||6.72 g||4.83 g|
We need these cookies and similar technologies to enable the basic functions of our website. This includes, for example, saving these settings. This is strictly necessary so that you cannot switch this off.
To ensure that we can tailor our marketing campaigns to your needs, we collect how you come to our website and how you interact with our advertisements. This helps us to make not only our ads, but also our content even better for you. Our marketing partners also use this information for their own purposes, e.g. to personalise your account or profile on their platform.